RotoView Data View/Setup
The Data View/Setup window monitors the communication with the RotoView sensor unit. Use this window to evaluate the raw sensor data and troubleshoot the connection. To view the Data View/Setup window, click on the Expand/Contract
button
(if you are not already in Expanded Mode), and then click on the Data
View/Setup
button. Or, right-click anywhere on the Main
Module and select Data View/Setup. White Paper
Evaluation System
How It Works
Features/Specifications
Roadmap
Quick
StartSupport
How To Order
Other Products
About INNOVENTIONS
News Releases
Company Profile
Contact us at
(281) 879-6226
sales@innoventions.com
About INNOVENTIONS
News Releases
Company Profile
Contact us at
(281) 879-6226
sales@innoventions.com
The following window should appear:
The Data View/Setup window lets you control the red and green LEDs provided on the RotoView unit, change Timer 2 and Timer 3 settings, change the number of ADC samples, and change the polling interval that the RotoView Development System refreshes its data from RotoView.
Click on the checkboxes to turn on/off the red and green LEDs on the RotoView unit. This is a good way to see that RotoView and your PC can communicate. Of course, you must have a USB connection established to communicate.
Timer 2 controls the rate at which an ADC sample is performed. The default setting is 5 mS (milliseconds). You can change the Timer 2 rate by entering a number between 0 and 65, and then clicking on the Set button. Timer 3 controls our "ticker" rate, which is labeled as T in the Data box. The default setting for Timer 3 is 10 mS. You can change the Timer 3 rate in the same fashion as Timer 2. The range for Timer 3 is also 0 to 65 mS.
The ADC Average control lets you get more accurate and stable values from your RotoView unit. The default setting is 1 sample per RotoView Development System poll.
The Polling box allows you to change the rate that the RotoView Development System communicates with RotoView.
Save (*.log) files so you can view and print the raw data sent to your PC. The (*.log) files are important for research and assist in technical support.
Related Links:
· RotoView Response Graph Editor
· RotoView Setup
Questions? Please e-mail support@innoventions.com, or call 1+ (281) 879-6226, 9-5 p.m. US Central Time.